The PCM monitors engine speed deviation from the target idle engine speed when the vehicle is stopped and the throttle valve opening is stable. The PCM sets DTC P0507 if the difference to the target idle engine speed is higher than the predetermined threshold.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Monitoring deviation between target idle speed and actual engine speed | 1. A stuck or binding throttle body 2. Air leakage 3. Poor connection or damaged harness 4. Faulty ETC |
Enable Conditions |
•
Coolant temp. > 165℉
•
Time elapsed after ( pedal value = 0% and vehicle speed = 0mph)
•
11< Battery voltage <16
•
No relevant failure | |
Threshold Value |
•
Current RPM ＞Target RPM +200rpm Engine speed too high | |
Diagnostic Time |
•
17 sec. | |
Mil On Condition |
•
2 driving cycle |
