DTC Description

PCM sets DTC P2110 to indicate ETC system malfunction has occurred and engine is in Limp-Home mode. The PCM limits engine speed to 1500rpm after setting the DTC, as an Emergency Operation(Limp-Home)mode.

DTC Detecting Condition

Item

Detecting Condition

Possible Cause

DTC Strategy

•

Engine is in Limp-Home mode

1.

ETC system malfunction(Additional DTC when APS(Accel. Position Sensor)erroror ETC hardware check error(P2101, 2118)or TPS start check adaptation(P2119, P0638)or TPS reference voltage(P0652, P0653)or APS reference voltage(P0642, P0643,P0698,P0699)or APS ratio error(P2138)or both TPS1 and TPS2 erroror Level 2 monitoring error detected.)

Enable Conditions

•

The PCM detects ETC system malfunction.

Threshold Value

•

-

Diagnostic Time

•

-

Яндекс.Метрика