4.
Is resistance within the specification?
 | ▶ Go to next step as indicated below |
 | ▶ Replace Cold start solenoid valve and then go to "Verification of Vehicle Repair" procedure |
Ignition "OFF"
Disconnect Cold start solenoid valve connector.
Measure resistance between power and control terminals of Cold start solenoid valve.
Specification : Approx. 21 Ω ± 5% ( 23℃ , 73.4℉)
Is resistance within the specification?
| ▶ Go to next step as indicated below |
| ▶ Replace Cold start solenoid valve and then go to "Verification of Vehicle Repair" procedure |
IG KEY "OFF".
Disconnect Cold start solenoid valve & PCM connect
Measure the resistance between the control terminals of Cold start solenoid valve and PCM.
Specification : Below 1Ω
.Is resistance within the specification?
| ▶ Go to next step as indicated below |
| ▶ Repair the control wiring and than go to " Verification of Vehicle Repair " procedure. |
