2.
Monitor the "Current Data" to "ECU, KEY, Smartra STATUS' Parameter on the GDS.
Specification : 'LEARNT'
Fig.1) This data show that 2 keys have been taught, ECU has been learnt, Key in key cylinder has been learnt and SMARTRA3 has been learnt.
IGN "ON" & Engine "OFF" with key intended to register
Monitor the "Current Data" to "ECU, KEY, Smartra STATUS' Parameter on the GDS.
Specification : 'LEARNT'
Fig.1) This data show that 2 keys have been taught, ECU has been learnt, Key in key cylinder has been learnt and SMARTRA3 has been learnt.
Has the "Smartra STATUS" been learnt ?
 | ▶ Fault is intermittent caused by poor contact in the PCM/ECM or SMARTRA connector or was repaired and PCM/ECM memory was not cleared. Throughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration or damage.Repair or replace as necessary and go to "Verification Vehicle Repair" procedure. |
 | ▶ Go to "Component Inspection" Procedure. |
