The TPMS Module sets DTC C1662 when Auto Learning is not completed.
Item | Detecting Condition | Possible cause |
DTC Strategy |
•
During auto-learning, Check its sensor's ID | 1. Faulty TPMS sensor 2. Interference by an external cause |
Enable Conditions |
•
During Auto learning | |
Threshold value |
•
If the total number of the learned sensors is below 4.
•
When did not completed while vehicle speed is higher than 6.2m/ph(10k/ph) during 9 minutes +/-30seconds.
•
DTC Code up @ 10min. | |
Diagnostic Time |
•
9 minutes | |
Lamp |
•
Lamp off |
