This code is set when PCM detected that message is not received at communication line.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
–
No message from ECM |
–
Open or Short in CAN communication harness
–
PCM |
Enable Conditions |
–
Time after TCM turns on >0.5sec
–
Input speed > 400rpm | |
Threshold value |
–
Message from ECM No message | |
Detecting Time |
–
More than 2sec | |
Fail safe |
–
Engine speed:3000rpm
–
Throttle : 50%
–
Engine torque : Max*0.7 * Inhibit TIME OUT happen at BUS OFF happen. |
