Removal and Installation
1.

Remove the RH front wheel.

2.

Remove the drive belt.

(Refer to Timing System - "Drive Belt")

3.

Remove the crankshaft pulley bolt (B) and crankshaft pulley (A).

Tightening torque :

98.0 N.m + 35° (10.0 kgf.m + 35°, 72.3 Ib-ft + 35°)

note
●

Before assembling the crankshaft pulley, apply engine oil to a new oil seal lip.

●

Use the SST(ring gear stopper, 09231-2B100)(A) to remove the crankshaft pulley bolt.

4.

Install in the reverse order of removal.

Яндекс.Метрика