4.
Remove the intercooler mounting bracket (A) and intercooler (B).
Tightening torque :
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)
Remove the intercooler outlet hose after disconnecting the boost pressure sensor (BPS) connector.
(Refer to Intake And Exhaust System - "Intercooler Pipe and Hose”)
Remove the intercooler inlet hose.
(Refer to Intake And Exhaust System - "Intercooler Pipe and Hose”)
Remove the front bumper cover.
(Refer to Body - "Front Bumper cover")
Remove the intercooler mounting bracket (A) and intercooler (B).
Tightening torque :
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)
Install in the reverse order of removal.
