2.
Disconnect the accelerator pedal position sensor connector (A).
Turn ignition switch OFF and disconnect the negative (-) battery cable.
Disconnect the accelerator pedal position sensor connector (A).
Remove the accelerator pedal assembly from the vehicle after unscrewing the mounting bolt (B) and nuts (C).
Install in the reverse order of removal.
Accelerator pedal module installation nut:
12.8 ~ 15.7 N.m (1.3 ~ 1.6 kgf.m, 9.4 ~ 11.6 lb-ft)
Accelerator pedal module installation bolt:
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)
