1.
Disconnect the fuel filler hose (A), the leveling hose (B), and the ventilation hose (C).
Disconnect the fuel filler hose (A), the leveling hose (B), and the ventilation hose (C).
Remove the left - rear wheel & tire and the wheel house.
Unscrew the mounting bolt (A).
Remove the fuel filler neck assembly after unscrewing the mounting screws (A).
Install in the reverse order of removal.
Filler-neck assembly installation screw:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
Filler-neck assembly bracket installation bolt:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
