3.
Remove the side crash pad switch assembly.
Disconnect the battery negative cable from the battery and then wait for at least 30 seconds.
Remove the crash pad.
(Refer to Body - "Crash Pad")
Remove the side crash pad switch assembly.
Disconnect the heated streering switch and then remove the switch.
Check the continuity hetween the switch terminals as the heated steering switch is engaged.
Measure a resistance of NTC and Heated pad.
NTC resistance(Black / Yellow, Black) - 10.0 kΩ ± 10% (25°C)
Heated pad resistance (Yellow, Black) - 1.5~2.1 Ω ± 10%
Measure a temperature.
The temperature of wheel surface grip must rise from -20°C to 20°C within 6 minute
The temperature of wheel surface grip must keep 38°C ± 4°C after 25 minute
At that time switch on, all measure point (1~8)
