2.
Remove the output speed sensor (A).
Tightening torque :
10 ~ 12 N.m (1.0 ~ 1.2 kgf.m, 7 ~ 8 lb-ft)
caution
While installing the output speed sensor, do not allow dust or other foreign particles to enter the transaxle.
Install the new O-ring to the output shaft speed sensor.
Remove the output speed sensor (A).
Tightening torque :
10 ~ 12 N.m (1.0 ~ 1.2 kgf.m, 7 ~ 8 lb-ft)
While installing the output speed sensor, do not allow dust or other foreign particles to enter the transaxle.
Check the connector for dust, dirt, or oil, then connect the output speed sensor connector (A) securely.
Installation is the reverse of removal.
