3.
Remove the 2 bolts holding the starter, then remove the starter (A).
Tighting torque :
42.2 ~ 53.9 Nm (4.3 ~ 5.5 kgf.m, 31.1 ~ 39.8 lb-ft)
Disconnect the battery negative terminal.
Tightening torque
(-) terminal (without battery sensor):
7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2lb-ft)
(-) terminal (with battery sensor):
4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft)
Disconnect the starter cable from the B terminal on the solenoid then disconnect the connector from the S terminal.
Remove the 2 bolts holding the starter, then remove the starter (A).
Tighting torque :
42.2 ~ 53.9 Nm (4.3 ~ 5.5 kgf.m, 31.1 ~ 39.8 lb-ft)
Installation is the reverse of removal.
