8426586

Measure the resistance between power terminal and control terminal of PCSV harness connector.(Component side)

Specification :

Item	Specification
PCSV Coil Resistance (Ω)	16.0 [20 ℃ 68 ℉]

note

To view Flash content, you need to install the appropriate browser extension

Is the measured resistance within specification ?

	▶ Many malfunctions in the electrical system are caused by poor harness(es) and terminals. Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage. So, check poor connections and the related circuit between ECM and component thoroughly. Repair as necessary and go to "Verification of Vehicle Repair" procedure.
	▶ Substitute with a known-good PCSV and check for proper operation. If the problem is corrected, replace PCSV and then go to "Verification of Vehicle Repair" procedure.