Many malfunctions in the electrical system are caused by poor harness and terminals. Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.

Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.

Has a problem been found?

	▶ Repair as necessary and go to "Verification of vehicle Repair" procedure.
	▶ Go to "Main relay circuit inspection" procedure.

IG KEY "OFF".

Disconnect Main relay and Key "ON".

Measure the voltage between Power from battery(30) terminal of main relay harness connector and chassis ground.

Measure the voltage between Power from battery(86) terminal of main relay harness connector and chassis ground.

Is the measured voltage within specification ?

	▶ Go to "System inspection" procedure.
	▶ Check the fuse(ECU A 30A) between battery and main relay. ▶ Repair Open in power circuit and then go to "Verification of vehicle Repair" procedure.