8434275

1.

IG KEY "OFF".

2.

Disconnect alternator connector.

3.

IG KEY "ON" & ENG "OFF"

4.

Measure the voltage between L terminal of alternator harness connector and chassis ground.

Measure the voltage between FR terminal of alternator harness connector and chassis ground.

Measure the voltage between C terminal of alternator harness connector and chassis ground.(with ISG)

Specification : L terminal : B+

FR terminal : Approx. 9~11V

C terminal : Approx. 3.6V (with ISG)

note

To view Flash content, you need to install the appropriate browser extension

5.

Is the measured voltage within specification ?

	▶ Go to "Component inspection" procedure.
	▶ Repair as necessary and then go to "Verification of vehicle Repair" procedure.