The Air Conditioner Control Module sets DTC B2408 when Intake actuator has not been moved to the mode,where air condition control module controls, within 10 seconds.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Monitoring the Voltage | 1. Poor contact in harness 2. Open or short in motor power circuit 3. Faulty Intake actuator 4. Faulty A/C Control Module |
Enable Conditions |
•
IG KEY ON | |
Threshold value |
•
No movement to controlled mode position for 10 seconds | |
Failsafe |
•
Fixed as current position |
