3.
Disconnect the yaw rate ＆ lateral G sensor connector (A).
Turn ignition switch OFF and disconnect the negative (-) battery cable.
Remove the front seat (LH) assembly. (Refer to the Body group - Seat)
Disconnect the yaw rate ＆ lateral G sensor connector (A).
Remove the mounting nuts (B).
Tightening torque:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.7 ~ 8.8 Ib-ft)
Installation is the reverse of removal.
