2.
Compress and extend the piston rod (A) and check that there is no abnormal resistance or unusual sound during operation.
Check the components for damage or deformation.
Compress and extend the piston rod (A) and check that there is no abnormal resistance or unusual sound during operation.
If non smooth working or unusual sound during operation, the shock absorber must be exchanged.
Fully extend the piston rod.
Drill a hole on the (A) section to remove gas from the cylinder.
The gas coming out is harmless, but be careful of chips that may fly when drilling.
Be sure to wear safety goggles or eye protection when performing this task.
