1.
Make a groove on the head of special bolts (A) by a punch.
Make a groove on the head of special bolts (A) by a punch.
Loosen the special bolt using a screw driver and then remove the key lock assembly from the steering column assembly.
Reassembly is the reverse of the disassembly.
Loosen the bolt (A) and then disconnect the universal joint assembly from the steering column assembly.
Tightening torque :
29.4 ~ 34.3N.m(3.0 ~ 3.5kgf.m, 21.7 ~ 25.3lb-ft)
Reassembly is the reverse of the disassembly.
