1.
Disconnect the fuel filler pipe (A) and the leveling pipe (B), and then disconnect the vapor hose (C).
Disconnect the fuel filler pipe (A) and the leveling pipe (B), and then disconnect the vapor hose (C).
Open the fuel filler door and unfasten the filler-neck assembly mounting screws (A).
Remove the rear-LH wheel and tire.
Remove the bracket mounting bolts (A) and remove the filler-neck assembly.
Installation is reverse of removal.
Filler-neck assembly installation bolt:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
Filler-neck assembly installation screw:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
