2.
Install the input speed sensor (A).
Tightening torque :
10 ~ 12 N.m (1.0 ~ 1.2 kgf.m, 7 ~ 8 lb-ft)
caution
While installing the input shaft speed sensor, do not allow dust or other foreign particles to enter the transaxle.
Install the new O-ring to the input speed sensor.
Install the input speed sensor (A).
Tightening torque :
10 ~ 12 N.m (1.0 ~ 1.2 kgf.m, 7 ~ 8 lb-ft)
While installing the input shaft speed sensor, do not allow dust or other foreign particles to enter the transaxle.
Check the connector for dust, dirt, or oil, and then connect the input speed sensor connector (A) securely.
Installation is the reverse of removal.
