Disconnect the negative (-) battery terminal.

Remove the trunk lower trim.

(Refer to Body - " Trunk Lid")

Disconnect the rear combination lamp connector (A). Remove the rear combination lamp assembly (B) after loosening 3 nuts.

Remove the bulb after turning in the counterclockwise direction.

A : Tail Lamp / Stop Lamp

B : Turn Signal Lamp

C : Rear Fog Lamp (LH), Back Up Lamp (RH)

If necessary to remove the bulb, remove the bulb after pulling the trim cover aside.

Install the rear combination lamp assembly.

Connect the rear combination lamp assembly connector.

Connect the negative (-) battery terminal.