3.
Disconnect the rear combination lamp connector (A). Remove the rear combination lamp assembly (B) after loosening 3 nuts.
Disconnect the negative (-) battery terminal.
Remove the trunk lower trim.
(Refer to Body - " Trunk Lid")
Disconnect the rear combination lamp connector (A). Remove the rear combination lamp assembly (B) after loosening 3 nuts.
Remove the bulb after turning in the counterclockwise direction.
A : Tail Lamp / Stop Lamp
B : Turn Signal Lamp
C : Rear Fog Lamp (LH), Back Up Lamp (RH)
If necessary to remove the bulb, remove the bulb after pulling the trim cover aside.
