3.
Remove the connector and 2 bolts. Then remove the electronic steering column lock (A).
Disconnect the negative (-) battery terminal.
Remove the steering column upper and lower shrouds.
(Refer to Steering System - "Steering Column-Shaft")
Remove the connector and 2 bolts. Then remove the electronic steering column lock (A).
Install the electronic steering column lock.
After checking that the lock works properly, tighten the shear bolts until the head twists off.
Tightening torque :
7.0 ~ 13.0 Nm (0.7 ~ 1.3 kgf.m , 5.0 ~ 9.0 lb.ft)
Install the steering column upper and lower shrouds.
Install the negative (-) battery terminal.
