3.
Loosen the mud guard mounting screws.
When removing and installing the fender, an assistant is necessary.
Be careful not to damage the fender and body.
When removing the clips, use a clip remover.
Remove the front bumper cover.
(Refer to the BD group - “Front bumper”)
Remove the head lamps.
(Refer to the BE group - “Head Lamps”)
Loosen the mud guard mounting screws.
After loosening the mounting screws, then remove the front bumper side mounting bracket (A).
Using a screwdriver or remover, remove the fender side cover (B).
After loosening the mounting bolts and nut, then remove the fender (A).
Installation is the reverse of removal.
