1.
Loosen the radiator upper cover mounting bolts and clips.
Put on gloves to protect your hands.
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
Take care not bend or scratch the cover and other parts.
Loosen the radiator upper cover mounting bolts and clips.
Remove the mounting clips.
After loosening the front bumper side’s mounting screw, then disconnect the side’s.
Push the lock pin, disconnect the fog lamp connector (A).
Remove the front bumper.
Installation is the reverse of removal.
Make sure the connector is plugged in properly.
Replace any damaged clips.
