1.
Disconnect the vapor hose (A) and then remove the PCV valve (B).
Disconnect the vapor hose (A) and then remove the PCV valve (B).
Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger moves.
If the plunger does not move (PCV valve is clogged), clean or replace the valve.
Installation is reverse of removal.
PCV Valve installation:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
