1.
After disconnect the boots form the consol upper cover, remove the knob (A).
After disconnect the boots form the consol upper cover, remove the knob (A).
Remove the center console assembly.
(Refer to Body - "Floor Consol")
Remove the shift cable (A).
Disconnect connector (B).
Disconnect the wiring mounting clips from the shift lever.
Disconnect the wiring mounting clip(A) from the shift lever.
Remove the shift lock cable (A).
Tightening torque:
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)
Remove the shift lever assembly (A) by removing the bolts.
Tightening torque:
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)
Install in the reverse order of removal.
Install the cable after placing the shift lever and the manual control lever in the N position.
