Transaxle model | A4CF1 | |
Engine model | Gasoline 1.4 MPI | |
T/con | 3 elements 2 phases 1 stage | |
T/con size | Φ 225 mm (8.8583 in.) | |
O/PUMP type | Parachoid | |
T/M CASE type | Separated | |
Friction elements | Clutch: 3EA | |
Brake: 2EA | ||
OWC: 1EA | ||
Planetary gear | 2EA | |
Gear ratio | 1st | 2.919 |
2nd | 1.551 | |
3rd | 1.000 | |
4th | 0.713 | |
Reverse | 2.480 | |
Final gear ratio | 3.849 | |
Fluid pressure balance piston | 2EA | |
Stall speed | 2,000 ~ 2,700 rpm | |
Accumulator | 4EA | |
Solenoid valve | 6EA (PWM: 5EA, VFS: 1EA) | |
Shift lever position | 6 range (P,R,N,D,2,L) | |
Oil filter | 1EA | |
PWM : Pulse Width Modulation
VFS : Variable Force Solenoid
Item | Nm | kgf.m | lb-ft |
Shift cable bracket | 15 ~ 22 | 1.5 ~ 2.2 | 10.8 ~ 15.9 |
Input shaft speed sensor | 10 ~ 12 | 1.0 ~ 1.2 | 7.2 ~ 8.6 |
Output shaft speed sensor | 10 ~ 12 | 1.0 ~ 1.2 | 7.2 ~ 8.6 |
Manual control lever | 17 ~ 21 | 1.7 ~ 2.1 | 12.3 ~ 15.2 |
Inhibitor switch | 10 ~ 12 | 1.0 ~ 1.2 | 7.2 ~ 8.6 |
Oil pan | 10 ~ 12 | 1.0 ~ 1.2 | 7.2 ~ 8.6 |
Oil drain plug | 40 ~ 50 | 4.0 ~ 5.0 | 28.9 ~ 36.1 |
Pressure check plug | 8 ~ 10 | 0.8 ~ 1.0 | 5.8 ~ 7.2 |
Front roll support bracket bolt | 60 ~ 80 | 6.0 ~ 8.0 | 43.4 ~ 57.8 |
Rear roll support bracket bolt | 60 ~ 80 | 6.0 ~ 8.0 | 43.4 ~ 57.8 |
Transaxle support bracket bolt | 60 ~ 80 | 6.0 ~ 8.0 | 43.4 ~ 57.8 |
Item | Specified lubricant | Quantity |
Transaxle fluid liter (US qt, lmp.qt) | GENUINE DIAMOND ATF SP-III or SK ATF SP -III | 6.8 (7.2, 5.98) |
Item | Specified sealant |
Rear cover Torque converter housing Oil pan | LOCTITE FMD-546 |
