Measure the clutch pedal height (from the face of the pedal pad to the floor board) and the clutch pedal clevis pin play (measured at the face of the pedal pad.)
Standard value
Stroke (A): 140 ± 0.3 mm (5.5118 ± 0.0118 in.)
Height (B): 173 mm (6.8110 in.)
Do not spill brake fluid on the vehicle; it may damage the paint if brake fluid does contact the paint, wash it off immediately with water.
Disconnect the ignition lock switch connector (A) and clutch switch (B).
Disconnect the push rod from the clutch pedal by removing the snap pin (A) and washer.
Remove the clutch pedal mounting nuts (A-3ea, B-1ea).
Tightening torque:
(A) 12.7 ~ 15.7 N.m (1.3 ~ 1.6 kgf.m, 9.4 ~ 11.6 lb-ft)
(B) 18.6 ~ 23.5 .Nm (1.9 ~ 2.4 kgf.m, 13.7 ~ 17.4 lb-ft)
Remove the clutch pedal assembly.
Install in the reverse order of removal.
