3.
Disconnect the tube (B) from the master cylinder after removing fixing pin (A)
caution
●
Do not spill brake fluid on the vehicle it may damage the paint if brake fluid does contact the paint, wash it off immediately with water.
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - " Air Cleaner")
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
Disconnect the tube (B) from the master cylinder after removing fixing pin (A)
Do not spill brake fluid on the vehicle it may damage the paint if brake fluid does contact the paint, wash it off immediately with water.
Remove the clip (A) from the clutch tube bracket.
Remove the clutch tube (A) from the release cylinder assembly (B).
When installing, O-rings of clutch tube should be replaced with a new one.
Install in the reverse order of removal.
After be equipped, perform bleeding air procedure after pouring the brake fluid.
(Refer to Clutch System - "Clutch release cylinder")
