2.
Loosen the oil filler plug (A).
Park the vehicle on a level ground and stop the engine.
Loosen the oil filler plug (A).
Check level with finger.
Oil level must be up to fill the hole, if not, add oil until it runs over.
Install the filler plug with a new gasket.
Tightening torque:
58.9 ~ 78.5 N.m (6.0 ~ 8.0 kgf.m, 43.4 ~ 57.8 lb-ft)
Park the vehicle on a level ground and stop the engine.
Drain the manual transaxle oil after loosening the drain plug (A).
Intall the drain plug with a new gasket
Tightening torque:
58.9 ~ 78.5 N.m (6.0 ~ 8.0 kgf.m, 43.4 ~ 57.9 lb-ft)
Add new oil through the filler plug hole and, fill it just below the plug opening.
Standard oil: API Service GL-4, SAE 70W (SHELL : SPIRAX S6 GHME 70W, SK : HK MTF 70W , GS CALTEX : GS MTF HD 70W)
Oil capacity: 1.9 ~ 2.0L (0.50 ~ 0.53 U.S.gal., 2.0 ~ 2.1 U.S. qt., 1.67 ~ 1.76 lmp qt.)
