3.
Measure resistance between terminals 1/C103 and 2/C103 of the wheel speed sensor harness connector(sensor side)
1)
Specification : Approx. 1,300~1,900Ω at 20℃(68℉)
Ignition "OFF"
Disconnect wheel speed sensor harness connector
Measure resistance between terminals 1/C103 and 2/C103 of the wheel speed sensor harness connector(sensor side)
Specification : Approx. 1,300~1,900Ω at 20℃(68℉)
Is resistance within specifications?
YES
Inspect the following items:
- Gap between ABS sensor and trigger wheel (Air gap : 0.3~1.1 mm(0.011 ~ 0.043 in))
- Trigger wheel condition
Repair or replace as necessary and go to "Verification of Vehicle Repair" procedure
NO
Test with a new sensor and check for proper operation. If problem is corrected, replace sensor and go to "Verification of Vehicle Repair" procedure
