Ignition OFF
Speed Sensor,TCCU connector : Disconnect.
Measure resistance between terminal 1 & 2 of FLSS harness connector M66 .
Specification : Approx. 1.1±0.05㏀.
The above value is only for reference. The data from vehicle may differ from it according to various vehicle condition. This inspection is for checking open or short of EMC coil.
Is resistance display near the specified value?
YES
Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
Repair or replace as necessary and then go to "Verification of Vehicle Repair" procedure.
NO
Check "Speed Sensor" for contamination, deterioration, or damage.
Substitute with a known-good "Speed Sensor" and check for proper operation. If the problem is corrected, replace "Speed Sensor" and then go to "Verification of Vehicle Repair" procedure.
