1.
Using the special tool (09545-3A000, 09216-21100), press-fit the lower arm (G) bushing.
note
The standard pull-out force for the bushing: more than 50 N [500 kg(f), 1103 lb(f)].
Using the special tool (09545-3A000, 09216-21100), press-fit the lower arm (G) bushing.
The standard pull-out force for the bushing: more than 50 N [500 kg(f), 1103 lb(f)].
Supporting the ball joint flange, press down the lower arm bushing until the flange touches the lower arm surface.
Do not press the ball joint cap.
Using a snap ring plier, install the snap ring. Keep the amount of the snap ring expansion as small as possible.
Apply multi-purpose grease to the dust cover lip and inside the cover.
Grease: Sunlight MB-2 or LUBCHEM SB 6042M |
Using the special tool (09545-11000), install the dust cover until it is completely seated on the snap ring.
