Tighten the trailing arm bushing mounting bolt.
Install the rear brake backing plate by tightening the four bolts.
After tightening the rear suspension upper and lower arm mounting nuts, insert new split-pins.
Install the parking brake cable.
Remember clamping the parking brake cable with a clip.
Attach the parking brake cable bracket with a bolt and the brake hose bracket with a clip.
Loosen the clamp which has been done to the brake hose in REMOVAL step. See page SS-20.
Install the rear hub assembly with a hammer.
It could be handly possible to install the rear hub completely only by hammering.
It will be installed firmly by tightening the flange nut.
Install the brake drum (or caliper) with screws (or bolts) to the brake backing plate.
Install the washer and the flange nut to the driveshaft. Tighten the flange nut as firmly as it can be for the complete installation of the rearhub assembly.
