1.
Remove the D.O.J. boot bands and pull the D.O.J. boot from the D.O.J. outer race.
caution
Be careful not to damage the boot.
Do not disassemble the B.J. assembly.
Special grease must be applied to the driveshaft joint. Do not substitute with another type of grease.
The boot band should be replaced with a new one.
Remove the D.O.J. boot bands and pull the D.O.J. boot from the D.O.J. outer race.
Be careful not to damage the boot.
Remove the circlip with a flat-blade screwdriver.
Pull out the driveshaft from the D.O.J. outer race.
Remove the snap ring and take out the inner race, cage and balls as an assembly.
Clean the inner race, cage and balls without disassembling.
Remove the B.J. boot bands and pull out the D.O.J. boot and B.J. boot.
If the boot is to be reused, wrap tape around the driveshaft splines to protect the boot.
