2.
Check the piston seal, boot, and pin insulators for wear and damage.
Check the pads for wear or oil contamination and replace if necessary.
The pads for the right and left wheels should be replaced at the same time.
Pad thickness wear limit : 2.0mm (0.08 in.) |
Check for worn or damaged dust boots. If dust or mud had entered the caliper assembly through this seal, the caliper assembly must be replacedor rebuilt.
Check the piston and its inside for wear, damage and rust.
Replace the damaged parts if necessary.
Check the piston seal, boot, and pin insulators for wear and damage.
ITEMS | Standard value | Service limit |
Thickness of disc | 10mm (0.39 in.) | mm (0.33 in.) |
Runout | - | 0.04mm (0.0016 in.) |
