Installaion
Insert a new copper sealing ring (if necessary, apply small quantity of grease to bond it to injector).
Install the injector (do not touch the nozzle tip) and sliding clamp with clamp bolt.
Screw the clamp bolt.
25 ~ 29 N.m (250 ~ 290 kgf.cm)
Install the high pressure pipes.
31 ~ 35 N.m (310 ~ 350 kgf.cm)
When mounting the high pressure pipes, fix the hexagon component of high pressure fuel injection parts not to squeeze heavily the high pressure fuel injection parts.
Attach the connection of back leak rail. Never fit without clip.
Check the tighteness of back leak rail by tugging it.
Attach the electric connector.
Re-connect the negative battery(-) terminal.
Start the engine and check the high pressure circuit for leaks.
Read out the fault memory and cancel the faults stemming from the detached injector plug.
