Fuel system is subject to extremely high pressure (1350 bar).
Never perform any work on injection system with engine running or within 30 seconds after stopping the engine.
Always pay attention to safety precautions.
Ensure the absolute cleanliness.
Insert the coupling into the pump.
Lightly apply the grease to O-ring and install the pump in cylinder head. At this time, turn the pump until the shaft stub of the pump engages the camshaft.
Apply the medium- strength screw locking compound to the bolt threads.
Install the retaining bolts with washers and tighten to
Tightening torque : 13 ~ 18 N.m (130 ~ 180 kgf.cm)
Install the high pressure pipe
Tightening torque : 18 ~ 23 N.m (180 ~ 230 kgf.cm)
