2.
Install the new O-ring onto the groove on the front end of the engine coolant pipe, then wet the O-ring with water. Do not apply oil or grease.
Clean the gasket surfaces of the engine coolant pump body and the cylinder block.
Install the new O-ring onto the groove on the front end of the engine coolant pipe, then wet the O-ring with water. Do not apply oil or grease.
Install a new engine coolant pump gasket and engine coolant pump assembly. Tighten the bolts to the specified torque.
Tightening torque |
Engine coolant pump bolt : |
20 - 27 Nm (200 - 270kg.cm, 14 - 20 lb.ft) |
Install the timing belt tensioner and timing belt. Adjust the timing belt tension, then install the timing belt covers.
Install the engine coolant pump pulley and drive belt, then adjust the belt tension.
Refill the coolant.
Run the engine and check for leaks.
