3.
Install the auto tensioner.
Install the crankshaft sprocket onto the crankshaft.
Pay attention to the direction of the flange. If it is installed in the wrong direction, a broken belt could result.
Install the special washer and sprocket bolt to the crankshaft and then tighten the sprocket bolt.
Tightening torque |
Crankshaft sprocket bolt : |
185 - 195 Nm (1850 - 1950 kg·cm, 136 - 144 lb.ft) |
Check timing mark.
Crankshaft side : Timing mark at crankshaft sprocket and timing pin at oil pump housing.
Camshaft side : Timing mark at camshaft sprocket and head.
Install tensioner.
Install the auto tensioner.
Tighten the pivot bolt.
Tightening torque : |
50 - 55 Nm (500 - 550 kg·cm, 37 - 40.6 lb.ft) |
Install timing belt.
Loosen the stop bolt. (Tensioner arm will move and tighten timing belt.)
Rotate engine more than 2 revelutions. (Check timing mark)
Tighten stop bolt.
Remove the pin.
