Clean the gasket surfaces of the engine coolant pump body and the cylinder block.
Install the new O-ring onto the groove on the front end of the engine coolant pipe, then wet the O-ring with water. Do not apply oil or grease.
Install a new engine coolant pump gasket and engine coolant pump assembly. Tighten the bolts to the specified torque.
Tightening torque |
Engine coolant pump bolt : |
10 mm : 10 - 12 Nm (100 - 120kg·cm, 7 - 9 lb·ft) |
14 mm : 48 - 52 Nm (480 - 520 kg·cm, 35 - 38lb·ft) |
Install the timing belt tensioner and timing belt. Adjust the timing belt tension, then install the timing belt covers.
Refill the coolant.
Run the engine and check for leaks.
