4.
Read "DTC Status" parameter
After a repair, it may be necessary to check that fault is properly rectified.
Install the scan tool and access the "Diagnostic Trouble Codes" screen
Press F4(DTAL) to select DTC information from the DTCs menu
Confirm that "DTC Readiness Flag" indicates "Complete". If not, drive the vehicle within conditions noted in the freeze frame data or enable conditions
Read "DTC Status" parameter
Is parameter displayed "History(Not Present) fault"?
- History (Not Present) fault : DTC occurred but has been cleared.
- Present fault : DTC is occurring at present time.
YES
System OK
NO
Go to the applicable troubleshooting procedure.
