Component Inspection1
1.

CHECK SOLENOID VELVE

(1)

Ignition "OFF".

(2)

Disconnect "A/T SOLENOID VALVE" connector

(3)

Measure resistance between terminal "7" and terminal "10" of the ATM SOLENOID VALVE harness connector

1)

Specification: Approximately 2.7~3.4 Ω (20℃)

(4)

Is resistance within specifications?

YES

a.

Go to "CHECK PCM/TCM" as below

NO

a.

Replace TCC SOLENOID VALVE as necessary and go to "Verification Vehicle Repair" procedure

2.

CHECK PCM/TCM

(1)

Connect scantool to data link connector(DLC)

(2)

Ignition "ON" & Engine "OFF".

(3)

Select A/T Solenoide valve Actuator test and Operate Actuator test.

(4)

Can you hear operating sound for TCC SOLENOID VALVE Actuator Testing Function ?

YES

a.

Go to "Component Inspection2" procedure

NO

a.

Substitute with a known-good PCM/TCM and check for proper operation. If the problem is corrected, replace PCM/TCM as necessary and then go to "Verification of Vehicle Repair" procedure.

note
1)

ACTUATOR TEST CONDITION

a.

IG SWITCH ON

b.

TRANSAXLE RANGE SWITCH is normal

c.

P RANGE

d.

Vehicle Speed 0km/h

e.

Throttle position< 1V

f.

IDLE SWITCH ON

g.

ENGINE RPM 0

Component inspection2
1.

CHECK TORQUE CONVERTER CLUTCH SOLENOID VALVE

(1)

Connect scantool to data link connector(DLC)

(2)

Ignition "ON" & Engine "OFF".

(3)

Select A/T Solenoide valve Actuator test and Operate Actuator test.

(4)

Can you hear operating sound for using TCC SOLENOID VALVE Actuator Testing Function ?

YES

a.

Go to "CHECK OIL PRESSURE" as below.

NO

a.

Replace "TCC SOLENOID VALVE" as necessary and Go to "Verification Vehicle Repair" procedure

2.

CHECK OIL PRESSURE

(1)

Connect Oil pressure guage to "DA" port.

(2)

Engine "ON".

(3)

After connecting Scantool and monitor the "TCC SOLENIOD VALVE DUTY" parameter on the Scantool data list.

(4)

Operate vehicle with 3rd or 4th gear and operate the "TCC SOLENIOD VALVE DUTY" more than 85%.

1)

Specification:Oil pressure guage approx 735.4960KPa(7.5kg/㎠)-(In condition that TCC SOL. DUTY > 85%)

(5)

Is oil pressure value within specifications?

YES

a.

Repair TORQUE CONVERTER CLUTCH(REPLACE Torque Converter ) as necessary and Go to "Verification Vehicle Repair " procedure.

NO

a.

Replace A/T ass'y (possible to BODY CONTROL VALVE faulty) as necessary and Go to "Verification Vehicle Repair " procedure.

Яндекс.Метрика