Part | Standard value | Remark |
System | ||
Type | Solenoid/Solenoid | |
Mode | ABS + EBD + BTCS | |
ECU | ||
Operating voltage | 10V - 16V | |
Operating temperature | -40°C - 110°C | |
Warning lamp | ||
ABS / EBD | ||
Operating voltage | 12V | |
Consumption current | 80mA | |
Wheel speed sensor | ||
Frequency | 15 - 2,000 Hz | |
Min. peak to peak voltage | (at 15Hz) | |
Internal resistance | ||
Front | 1,385 ± 110Ω | |
Rear | 1,385 ± 110Ω | |
Insulation resistance | Min. 1000kΩ | |
Air gap | ||
Front | 0.3-0.9 mm | |
Rear | 0.3-0.9 mm | |
Tone wheel | 47 teeth | |
HECU (Hydraulic and Electronic Control Unit) | o LPA : Low Pressure Accumulator o HPA : High Pressure Accumulator o NO : Normal Open o NC : Normal Close o TC : Traction Control | |
Motor power | 250W | |
Accumulator amount | ||
LPA | 3.0cc | |
HPA | 6.0cc | |
NO solenoid valve | ||
Front | Ø0.70mm/Ø0.25mm | |
Rear | Ø0.355mm | |
NC solenoid valve | ||
Front | Ø0.63mm | |
Rear | Ø0.40mm | |
Pump orifice | Ø0.5mm | |
TC valve relief pressure | 120 - 150 bar. |
Nm | kg.cm | lb.ft | |
Sensor mounting bolt on the brake plate | |||
Front | 8 - 9 | 80 - 90 | 5.9 - 6.6 |
Rear | 8 - 9 | 80 - 90 | 5.9 - 6.6 |
Hydraulic & electronic control unit mounting bolt | 8 - 10 | 80 - 100 | 5.9 - 7.3 |
Hydraulic & electronic control unit mounting bracket bolt | 17 - 26 | 170 - 260 | 12.5 - 19 |
Brake tube nut | 13 - 17 | 130 - 170 | 9.5 - 12.5 |
