Item | Specified sealant |
Engine coolant temperature sensor | LOCTITE 962T or equivalent |
Item | Nm | Kg·cm | Ib·ft |
Delivery pipe installation bolt | 10 ~ 15 | 100 ~ 150 | 7 ~ 11 |
Engine coolant temperature sensor | 20 ~ 40 | 200 ~ 400 | 14 ~ 29 |
Heated oxygen sensor | 40 ~ 50 | 400 ~ 500 | 29 ~ 36 |
Heated oxygen sensor connector bracket bolt | 8 ~ 12 | 80 ~ 120 | 5.8 ~ 8.7 |
Fuel pressure regulator installation bolt | 7 ~ 11 | 70 ~ 110 | 5.2 ~ 8.1 |
High pressure hose and fuel main pipe | 30 ~ 40 | 300 ~ 400 | 22 ~ 29 |
High pressure hose and fuel filter | 25 ~ 35 | 250 ~ 350 | 18 ~ 25 |
High pressure hose to delivery pipe | 3 ~ 4 | 30 ~ 40 | 2.2 ~ 3 |
Fuel pump assembly to fuel tank | 2 ~ 3 | 20 ~ 30 | 1.4 ~ 2.2 |
High pressure hose at fuel tank | 30 ~ 40 | 300 ~ 400 | 1.4 ~ 2.2 |
Throttle body to surge tank | 15 ~ 20 | 150 ~ 200 | 11 ~ 14 |
Accelerator arm bracket bolts | 8 ~ 12 | 80 ~ 120 | 5.8 ~ 8.7 |
ISC actuator | 6 ~ 8 | 60 ~ 80 | 4.4 ~ 5.8 |
Fuel sender to fuel tank | 2 ~ 3 | 20 ~ 30 | 1.4 ~ 2.2 |
Items | Standard value | ||
Basic ignition timing | 2.4 I4 | BTDC 7° ± 5° at curb idle | |
2.7 V6 | BTDC 12° ± 5° at curb idle | ||
Curb idle speed (rpm) | 2.4 I4 | D-range (A/T) | 700 ± 100 |
P,N-range | 750 ± 100 (A/C OFF) | ||
(A/T, M/T) | 800 ± 100 (A/C ON) | ||
2.7 V6 | D-range (A/T) | 820 ± 100 | |
P,N-range | 700 ± 100 (A/C OFF) | ||
(A/T, M/T) | 980 ± 100 (A/C ON) | ||
Fuel pressure kPa (psi) | Vacuum hose disconnection | 330 ~ 350 (47 ~ 50) at curb idle | |
Vacuum hose connection | Approx. 270 (38) at curb idle | ||
Evap canister purge control solenoid valve resistance | 20 ~ 32Ω | ||
Items | Specifications | |||
Throttle body | Throttle position sensor (TPS) | Type | Variable resistor | |
Resistance at curb idle | 2.4 I4 | 3.5 ~ 6.5 KΩ | ||
2.7 V6 | 1.6 ~ 2.4 KΩ | |||
Output voltage at curb idle | 2.4 I4 | 300 ~ 900 mV | ||
2.7 V6 | 250 ~ 800 mV | |||
Idle speed control (ISC) actuator | Type | Double Coil | ||
Resistance | 90 ~ 110 Hz | |||
Sensors | Air flow sensor | Type | 2.4 I4 | Hot Film sensor |
2.7 V6 | Hot Film sensor | |||
Intake air temperature (IAT) sensor | Type | 2.4 I4 & 2.7 V6 | Thermistor | |
Resistance | 2.33 ~ 2.97 KΩ at 20°C (68°F) | |||
Engine coolant temperature (ECT) sensor | Type | Thermistor | ||
Resistance | 2.5 KΩ at 20°C (68°F) | |||
0.3 KΩ at 80°C (176°F) | ||||
Heated oxygen sensor (HO2S) | Type | 2.4 I4 | Zirconium | |
2.7 V6 | Titanium | |||
Vehicle speed sensor | Type | Hall effect | ||
Camshaft position (CMP) sensor | Type | Hall effect | ||
Crankshaft position (CKP) sensor | Type | Hall effect | ||
Actuators | Injectors | Type, number | 2.4 I4 | Electromagnetic type, 4 |
2.7 V6 | Electromagnetic type, 6 | |||
Resistance | 13 ~ 16Ω at 20°C (68°F) | |||
Evaporative emission purge control solenoid valve | Type | Duty cycle type | ||
Fuel pressure regulator | Pressure regulator | 300 ± 1.5 kPa (3.35 ± 0.06 kg/cm²) | ||
Fuel tank | Tank capacity Return system | 65 lit (14.3 lmp.gal) Equipped | ||
Canister | Volume/Nominal working capacity | 3.0 liter/150g | ||
