2.
Connect the scantool and monitor the “VEHICLE SPEED SENSOR ”parameter on the scantool data list.
1)
Test condition : Engine “Start and Drive”
With raise vehicle on lift, Start engine and drive more than 30km/h speed.
Connect the scantool and monitor the “VEHICLE SPEED SENSOR ”parameter on the scantool data list.
Test condition : Engine “Start and Drive”
Is VEHICLE SPEED SENSOR display near the specified value?
YES
Go to “Terminal and Connector Inspection” of the W/Harness Inspection procedure
NO
Go to "Signal circuit inspection" of the W/Harness Inspection procedure
