Component Location
General Description

The pretensioner(BPT) located in the driver and passenger’s lower side of center pillar as above picture, together with an seat belt retractor units. The pretensioner seat belt helps to reduce the severity of injury to the front seat occupant by retracting the seat belt webbing. This prevent the occupant from thrusting forward and hitting the steering wheel(driver) or the instrument panel (passanger)when the vehicle crashes.

DTC Description

When short or decreased resistance in the driver side pretensioner’s(DBPT) squib. When the SRS warning light remain lite up and with DTC code,this means short or decreased resistance between control module and Pretensioner harness.

DTC Detecting Condition

Item

Detecting Condition

Possible Cause

DTC Strategy

● Driver Pretensioner short or decreased resistance

● Poor contact in the connector or wiring harness.

● Short circuit in wiring harness.

● Short circuit in DBPT squib.

Enable Conditions

● Ignition "ON"

Threshold Value

● DBPT Resistance <= 1.5 Ohm ( Less than 1.5Ω)

Diagnostic Time

Qualification

● More than 2 sec remaining

De-Qualification

● More than10 sec remaining

Specification

Test Condition

Resister (Ω)

Ignition OFF

1.9Ω ≤ R ≤ 4.7Ω

Schematic Diagram
note
To view Flash content, you need to install the appropriate browser extension
Яндекс.Метрика